- Erreur
-
- Erreur de chargement du module User 'nintandboxdb' has exceeded the 'max_questions' resource (current value: 18226) SQL=SELECT m.id, m.title, m.module, m.position, m.content, m.showtitle, m.params, mm.menuid FROM jz9t0_modules AS m LEFT JOIN jz9t0_modules_menu AS mm ON mm.moduleid = m.id LEFT JOIN jz9t0_extensions AS e ON e.element = m.module AND e.client_id = m.client_id WHERE m.published = 1 AND e.enabled = 1 AND (m.publish_up = '0000-00-00 00:00:00' OR m.publish_up <= '2026-01-17 22:14:36') AND (m.publish_down = '0000-00-00 00:00:00' OR m.publish_down >= '2026-01-17 22:14:36') AND m.access IN (1,1,5) AND m.client_id = 0 AND (mm.menuid = 497 OR mm.menuid <= 0) AND m.language IN ('fr-FR','*') ORDER BY m.position, m.ordering
-
- A lire avant de poster
-
-
La foire aux questions
Avant de poser votre question sur le forum, assurez-vous que la réponse n'existe pas déjà dans l'une de nos FAQ !
-
La foire aux questions
SNES Super Mario World - English
8 message(s)
• Page 1 sur 1
SNES Super Mario World - English
par setoffo » 03 Mai 2014, 15:02
Hey all,
Just wanted to present my latest box which I believe came out quite ok. Using 300gsm white paper, applying protective film ontop to give a glossy finish. It's a bit too glossy, but for now I think it looks quite ok.
I added a thin line for where I wanted to cut a support for bending the flap correctly, as it was incorrect to bend the flap where the sideflaps are. A small addon to the base design should perhaps be made?
Glossy finish, too much compared to originals.. but it's ok for me. The box is protected
My tools!
I use the ruler to line up the score, the I drag a non-sharp screwdriver to make the score.
Bends perfectly!
A little damage when I cut out the support for the open flaps. But can't really be seen if you don't look closely.
Looks good I must say
Running a white inside on this box, normally I print out a gray image on the other side of the paper. As can be seen on next photo for Maniac Mansion. Although the color is not completely correct but I couldn't get it to show like in real life.
The insert is a little bit too small both in width and height.. But overall very nice!
Finally, a shot with the actual cart inside it's new home.
I used the french version found on this site, but I've changed all the text to match that of an European/English box instead. Because even tho I understand some French, it's unfortunately not my main language which is Swedish But it's also fun that on the bottom of most boxes to SNES and N64 and some NES, there is actually Swedish text.
If you've seen "Från 8 år" and "Spara förpackningen", that's Swedish
Anyhow, let me know what you think!
Just wanted to present my latest box which I believe came out quite ok. Using 300gsm white paper, applying protective film ontop to give a glossy finish. It's a bit too glossy, but for now I think it looks quite ok.
I added a thin line for where I wanted to cut a support for bending the flap correctly, as it was incorrect to bend the flap where the sideflaps are. A small addon to the base design should perhaps be made?
Glossy finish, too much compared to originals.. but it's ok for me. The box is protected
My tools!
I use the ruler to line up the score, the I drag a non-sharp screwdriver to make the score.
Bends perfectly!
A little damage when I cut out the support for the open flaps. But can't really be seen if you don't look closely.
Looks good I must say
Running a white inside on this box, normally I print out a gray image on the other side of the paper. As can be seen on next photo for Maniac Mansion. Although the color is not completely correct but I couldn't get it to show like in real life.
The insert is a little bit too small both in width and height.. But overall very nice!
Finally, a shot with the actual cart inside it's new home.
I used the french version found on this site, but I've changed all the text to match that of an European/English box instead. Because even tho I understand some French, it's unfortunately not my main language which is Swedish
But it's also fun that on the bottom of most boxes to SNES and N64 and some NES, there is actually Swedish text.If you've seen "Från 8 år" and "Spara förpackningen", that's Swedish
Anyhow, let me know what you think!
Remember! I don't create my boxes to sell or try to show them off as originals. But I do want to have boxes that look like the original, to show friends and family what it did look like when it came out "back then".
- setoffo
- Message(s) : 86
- Inscription : 02 Mars 2014, 20:19
Re: SNES Super Mario World - English
par tachikoma33 » 03 Mai 2014, 15:24
Nice photos showing up your work. Great Job !
I do exactly the same technique for my boxes, white paper with a protective film, a liner tool for a correct bending, and a little cut in the left handside open flap.
I do exactly the same technique for my boxes, white paper with a protective film, a liner tool for a correct bending, and a little cut in the left handside open flap.
-
tachikoma33 - Message(s) : 918
- Inscription : 31 Juillet 2013, 14:04
- Localisation : Blanquefort, Gironde(33) (Sud-Ouest France)
Re: SNES Super Mario World - English
par setoffo » 03 Mai 2014, 16:08
Really? That sounds awesome! I'm a reprobox addict now, I love making boxes and this is my 6th or 7th now so.. and I keep making them because I'm buying games almost everyday now.. it's so fun I love Nintandbox!
I'm a reprobox addict now, I love making boxes and this is my 6th or 7th now so.. and I keep making them because I'm buying games almost everyday now.. it's so fun I love Nintandbox!
Remember! I don't create my boxes to sell or try to show them off as originals. But I do want to have boxes that look like the original, to show friends and family what it did look like when it came out "back then".
- setoffo
- Message(s) : 86
- Inscription : 02 Mars 2014, 20:19
Re: SNES Super Mario World - English
par exocil » 03 Mai 2014, 16:20
Good work congratulations
congratulations
http://youtu.be/x4-ByxnDpOg
-
exocil - Message(s) : 1895
- Inscription : 18 Novembre 2012, 23:02
Re: SNES Super Mario World - English
par setoffo » 03 Mai 2014, 17:44
Merci beaucoup
Remember! I don't create my boxes to sell or try to show them off as originals. But I do want to have boxes that look like the original, to show friends and family what it did look like when it came out "back then".
- setoffo
- Message(s) : 86
- Inscription : 02 Mars 2014, 20:19
8 message(s)
• Page 1 sur 1
Qui est en ligne ?
Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit et 123 invité(s)