NintAndBox.net - Bibliothèque de boites Nintendo en haute résolution à fabriquer soi-même

Collaborative library of Nintendo boxes

For NES, SNES, N64, G&W, GB, VB, GBC and GBA consoles
Enhance your loose video games collection for free
Help saving videogaming legacy
Contribute to the project by sending your scans and your restored boxes

Find how to make your boxes easily

 
  • Read first before post

[SNES] Make a Super Nintendo Box

Dans ce forum, venez partager votre expérience en matière de numérisation, de retouche et de fabrication des boites ou manuels.

[SNES] Make a Super Nintendo Box

Postby Nightwarex » 05 April 2015, 21:16

Tutorial made by exocil.
translated by Nightwarex.


Hello, here is a tutorial to build a SUPER NINTENDO game box . A synthesis of the various tutorials already on the site that I hope will serve to newcomers.

Image

[Reveal] Spoiler: Print, cut and paste
So you need a little material ...
Image

Cheap photo paper.

Image

Print the box you want

Image

Take a transparent sticker plasticizer cheap and an a guitar pick.

Image

Enough plasticizer is cut to cover the front and the back of the future box set.



Image

During lamination, we take off the grid bracket as you glue the plasticizer to avoid the formation of bubbles.

Image

With the help of the guitar pick, we just remove air microbubbles.


Image

Cut the excess parts


Image

Now, we take a Canson paper.

Image

Was cut in the coming paste Canson what subsequently both our parts box.


Image


We take the spray glue.


Image

On the back of our bomb both sides box.

Image

It is ready to be pasted.

Image


Is stuck on the rough side of the drawing paper for better grip and made more fun and smoother from inside the box.

Image

Positioning our side box on the drawing paper.

Image
Is covered with a white sheet.

Image

Pressing a corner, we just remove air bubbles with the fist.

[spoiler=]Image

Taking full of books or directories.

Image

We stacked them on both sides of box that has just paste and allowed to dry for 24 hours.


Image
This is what you get.

[Reveal] Spoiler: Folding and assembling the box
Image

With a ruler and cutteur the box is cut. If you rely on the good ruler and that your blade is new, you will have a perfect fit.


Image

It starts to take shape.

Image


Now we just cut the rounded scissors.

Image

If we take our time and that applies, the result will be better.

Image

Image

Once at 90 °, placing the ruler on the other side and performing a turning movement.

Image

Do not hesitate to support.

Image

Obtained with this technique beautiful folds, fold all slices tongue and both sides of your box.

Image


Taking the adhesion of the tongue side of the box and be folded at the place and in reverse.

Image


When we put it flat it gives us a little relief that will be handy for bonding.

Image

Taking the glue.

Image

One puts on the adhesive tab.

Image

Positioning the back of the box.

Image

The assembly is placed under a pile of books about twenty minutes.


Image

This is what you get.

Image

The box is shaped.

Image

We just put glue on the adhesive tab on the back of the box and closes the whole.

Image

We hold all with books drying time.

Image

Count again twenty minutes.
During this time you can prepare for the tablet perfectly sealed Nintendo will end your Inbox.

Image

We take the paper printable transparent sticker.


Image

It prints the pellet.


Image

Take a piece of 2 cents you put on the wafer.

Image

Go around the room with your cutter.

Image


On the sticky side of the patch, place a foil rectangle the size writing Nintendo, the matt side of the foil in contact with the sticky side of the patch.

Image

Your patch is ready.


Image

Then go back to your box and close it.

Image

And now, you're done.

Image

It only remains to put your game cartridge inside.


Image

And admire your work.


Image

The finished box side panel.

Image

The finished side box back
For a more close to that of the original boxes , if you have the opportunity use the A3 file you will gluing less and if you find a good, take a plasticizer matt .

CREDITS: Yoyo, Mimix, Solidmonsters, Emzed, Syd2091, Roman, Nintandbox.net, Oldiescovers.free, contributors and all those I have forgotten
Last edited by Nightwarex on 05 April 2015, 22:03, edited 1 time in total.
Nightwarex
 
Posts: 25
Joined: 12 September 2014, 20:36

Re: [SNES] Make a Super Nintendo Box

Postby Nightwarex » 05 April 2015, 21:22

So, i make a traslation from this excellent tutorial https://www.nintandbox.net/index.php/en/forum-index/viewtopic.php/f,6/t,803/
and try to organize a little more the tutorial beacuse it has SO many pictures and is fully detailed every step, wich is excellent but was a little difiicult to read (at least for me) i hope the edits i made would make it better.
The traslation isn´t fully completed, i am going to make some corrections, it was not that easy as i though :P
BTW if anyone can tell me what a "mediateur" is, that would help a lot xD i try google but doesn´t work, in the pictures looks like a guitar pick (?
Nightwarex
 
Posts: 25
Joined: 12 September 2014, 20:36

Re: [SNES] Make a Super Nintendo Box

Postby will13009 » 05 April 2015, 21:50

Le médiateur est bien un objet qui est utilisé pour jouer de la guitare ;)
User avatar
will13009
 
Posts: 2619
Joined: 05 June 2013, 21:43
Location: Marseille

Re: [SNES] Make a Super Nintendo Box

Postby Nightwarex » 05 April 2015, 22:03

will13009 wrote:Le médiateur est bien un objet qui est utilisé pour jouer de la guitare ;)


Thanks Will, that´s what i though
Nightwarex
 
Posts: 25
Joined: 12 September 2014, 20:36

Re: [SNES] Make a Super Nintendo Box

Postby rkun » 09 June 2015, 15:08

ficou linda
rkun
 
Posts: 4
Joined: 03 June 2015, 21:37


Return to Les tutoriels

Who is online

Users browsing this forum: No registered users and 181 guests

cron